Your Partner in the Race to Market

The PCB Design Professionals

PCB Designer
  
             
       
Detailed Quote Request
 
         
   
    
 

 
Please complete as much of the form below as possible.
Name: *
Company: *
Tel No: *
Project: *
Email: *

 

Board Items
PCB size X
The overall dimensions of the PCB. Where possible, board length to width relationships should be kept as similar as possible to minimise bow and twist..
Number of Layers
Layer numbers should be in pairs except under special circumstances.

Performance Class

An explanation of these board classes can be obtained from IPC-2221A "Generic Standards on Printed Board Design" 1.6.2 .
Rigid Board Type
Taken from the IPC-2222 "Sectional Standards for Rigid Organic Printed Boards" 1.5.1.
Flexi Board Type
Taken from the IPC-2223A "Sectional Design Standards for Flexible Printed Boards" 1.2.1.(Types 1, 2, and 3 may or may not have stiffeners).
Assembly Type
Taken from the IPC-2222 "Sectional Standards for Rigid Organic Printed Boards". 1.6 (Type 2 Class A is Not recommended!)
Board Material
Controlled impedance?
Will the design contain any controlled impedance signals?
Creepage and Clearance?
Will the design have any power creapage and clearance constraints?
Track Gap
This will define the minimum track width and track to track gap.
Number of Pins
All pins (connected and unconnected) should be included as this is can provide invaluable information while performing the density analysis.
Coating
 
Finish
 
Silk Screen Requirements
 
   

Additional Information

   

*Required Fields

 

 

  
               
         
© Black Stick Limited 2007
    

© Copyright 2005 BlackStick Ltd. All rights reserved.